22
3.Using the Unit
To Delete All the Values Stored in Memory
You cannot delete individual stored readings, all the readings in the unit
will be deleted.
1. Press the l/O button to turn the unit on.
2. When the heartbeat symbol ( )
appears on the display, first press
the M button. Then while holding it
down, press the I/O button
simultaneously for about 2-3
seconds. All readings will then be
deleted.
Important: Be careful not to press
the I/O button first. If
the I/O button is
pressed first, the
monitor is shut off.
3. Press the I/O button to turn the unit off.
Note: If you forget to turn the unit off, it will automatically shut
itself off after five minutes.
HEM-4022-IM_Main_[D].book 22 ページ ２０１１年１１月２日 水曜日 午後３時２４分
To Next Page
Loading...
