29
6.Maintenance and Storage
EN
Storage
Keep the unit in its storage case when not in use.
1. Unplug the air tube from the air connector.
2. Gently fold the air tube into the
arm cuff.
Note: Do not bend the air tube
excessively.
3. Place the arm cuff, inflation bulb
and main unit in the storage case.
Do not store the unit in the following situations:
• If the unit is wet.
• Locations exposed to extreme temperatures, humidity, direct sunlight,
dust or corrosive vapours.
• Locations exposed to vibrations, shocks or where it will be at an
angle.
• Locations exposed to chemicals or corrosive vapours.
HEM-4022-IM_Main_[D].book 29 ページ ２０１１年１１月２日 水曜日 午後３時２４分
To Next Page
Loading...
