15
3.Using the Unit
EN
3. Position the arm correctly.
Taking Measurements on the Right Arm
Apply the cuff so that
the air tube is at the
side of your elbow.
• Be careful not to rest
your arm on the air
tube, or otherwise
restrict the flow of air
to the cuff.
• The cuff should be 1
to 2 cm above the
elbow.
4. When the cuff is positioned correctly, close the fabric fastener
FIRMLY.
1) The air tube should run
down the inside of your
forearm and be in line with
your middle finger.
2) The bottom of the cuff
should be approximately 1
to 2 cm above your elbow.
3) Apply the cuff to your
upper arm so that the
marker (arrow under tube)
is centered on the middle
of your inner arm and
points down the inside of
the arm.
HEM-7117-E_main.book Page 15 Friday, May 14, 2010 8:43 AM
To Next Page
Loading...
Need help?
General
