Omron M2 User Manual

22
3.Using the Unit
3. Press the O/I START button to turn the unit off.
Note: If you forget to turn the unit off, it will automatically shut
itself off after five minutes.
To Delete All the Values Stored in Memory
You cannot delete individual stored readings, all the readings in the unit
will be deleted.
1. To delete stored readings, first
press the M button. Then while
holding it down, press the O/I
START button simultaneously for
about 2-3 seconds. All readings
will then be deleted.
Important: Be careful not to
press the O/I START
button first. If the O/I
START button is
pressed first,
measurement will
start.
2. Press the O/I START button to turn the unit off.
Note: If you forget to turn the unit off, it will automatically shut
itself off after five minutes.
2
1
HEM-7117-E_main.book Page 22 Friday, May 14, 2010 8:43 AM

Omron M2 Specifications

General

Type	Automatic
Cuff size	22 - 32 cm
Display type	LCD
Placement supported	Upper arm
Pulse rate measuring	-
Mean arterial pressure	Yes