Omron M5 User Manual

9
How To Use the Memory Function
This monitor has a memory capable of storing fourteen (14) sets of readings.
Every time you complete the measurement, the monitor automatically
stores blood pressure and pulse rate.
• Push the MEMORY button to recall stored readings while the Heart
Symbol ( ) is displayed.
• When fourteen (14) sets of readings are stored in memory, the oldest
set will be deleted to store a new set.
• To delete stored readings, press the MEMORY button and the START
button simultaneously, then all the readings will be deleted.
NOTE: You cannot delete the stored readings partially.
Keep pressing the MEMORY button
and the START button for 2 seconds.
ENGLISH (M5)-5 9/18/02 3:20 PM Page 9

Omron M5 Specifications

General

Device Type	Upper Arm Blood Pressure Monitor
Measurement Range Pressure	0 - 299 mmHg
Irregular Heartbeat Detection	Yes
Clinically Validated	Yes
Technology	Intellisense
Measurement Method	Oscillometric
Measurement Range Pulse	40 - 180 bpm
Accuracy Pressure	±3 mmHg
Accuracy Pulse	±5% of reading
Power Supply	4 AA batteries or AC adapter
Weight	Approx. 400g (without batteries)