TITLE
6
PREPARATION BEFORE MEASUREMENT
If the unit has been stored in the cold, leave it in the room
where you are going to use for 30 minutes or more. Do not
warm the unit by holding it in your hands or near the stove.
Instead, place it in the room where you are going to use to
restore to the room temperature.
Store the unit in the room where you are going to
use it.
The temperature indicated may be higher than the actual, if
the unit has been kept in a lower temperature than the room
temperature where you are going to use it.
Start measurement after the body (ear) is warmed
up.
The measurement results indicated may be lower than the
actual temperature in the following cases.
• Immediately after returning to your home (especially in
winter)
• Measurement taken in a cold room
• When the head (ear) is cooled by the ice bag
Confirm the measuring method by understanding the
best way to insert the unit in the ear during normal
temperature condition.
• Check the angle when the highest measurement value is
indicated in stable condition.
• The measurement value may differ for each ear. Try to
measure the temperature from the ear that shows the
highest temperature in stable condition.
TAKE NOTE !
To Next Page
Loading...
