MX3 Plus English
9
Product name OMRON MX3 Plus
Model HEM-742-E
Display Digital LCD
Measuring range Pressure: 0 - 299 mmHg / Pulse: 40 - 180 beats/minute
Accur
acy Pressure: ± 3 mmHg
Pulse: ± 5% of display reading
Inflation Automatic by electric pump
Deflation Automatic pressure release valve
Rapid pressure release Automatic exhaust valve
Pressure detection Capacitive pressure sensor
Measuring method Oscilliometric
Power supply 4 x 1.5V alkaline batter
ies type (LR6) AA
AC adapter (optional part)
Battery life New batteries will last for approximately 300 measurements
Operating temperature/humidity +10°C to +40°C / 30% to max. 85% relative humidity
Operating en
vironment Free from excessive vibrations, shocks, magnetic fields,
electrical noise
, etc.
Storage temperature/humidity -20°C to +60°C /10% to max. 95% relative humidity
Weight Approximately 350 gr including cuff, excluding batteries
Outer dimensions Approximately 118 mm (W) x 90 mm (H) x 130 mm (D)
Cuff dimensions
Appro
ximately 145 mm (W) x 480 mm (L)
Arm circumference 22 cm to 32 cm
Accessories
Cuff, instruction manual, guarantee card, blood pressure pass
Optional parts Large cuff for arm circumferences between 32 - 42 cm, AC adapter
Note Subject to technical modification without prior notice
= Type B 0197
Manufacturer
OMRON HEALTHCARE Co
., Ltd.
24,
Yamanouchi Yamanoshita-cho, Ukyo-ku, Kyoto, 615-0084 Japan
EU-representative OMRON HEALTHCARE EUROPE B.V., Kruisweg 577, NL-2132 NA
Hoofddorp
This device fulfils the provisions of the EC directive 93/42/EEC (Medical Device Directive). This blood
pressure monitor is designed according to the European standard EN1060, Non-in
v
asive
sphygmomanometers Part 1: General Requirements and Part 3: Supplementary requirements for
electromechanical blood pressure measuring systems.
8 Technical data
compartment and insert four new identical
1.5V alkaline batteries type AA LR6
batteries.
Spare parts
• Due to high company quality standards,
OMRON considers the main unit as a
non-serviceable part because the need
for proper calibration after replacement
of high tech components.
Attention! Disposal of used batteries
should be carried out in accordance with
the national regulations for the disposal
of batteries.
26032701 MX3Plus GB 01-12 14-04-2006 15:31 Pagina 9
To Next Page
Loading...
Need help?
General
