Omron MX 3 Plus - Measurement Process; Measurement Steps

MX3 Plus English
5
Caution! Allow an interval of at least three minutes between two successive measurements!
1 Sit comfortably at a table with your feet
flat on the floor and rest your arm on
the table.
2 Relax your arm and turn your palm
upward.
Caution! Cuff at heart height during
measurement!
PULSE/min
D
IA
mmHg
SYS
m
mHg
M
MX3 Plus
PULSE/min
DIA
mmHg
S
YS
mmHg
M
M
X3 Plus
PULSE/min
D
IA
mmHg
S
YS
m
mHg
M
MX3 Plus
3 Press on/off button.
Caution! Wait for zero and the heart symbol to continue!
4 Press start button
Note: the unit inflates the cuff to 170
mmHg. If required the unit
automatically increases the pressure by
40 mmHg.
Note: press and hold the start button to
set pressure higher than 170 mmHg.
Caution! Do not inflate over 280
mmHg!
PULSE/min
DIA
mmHg
SYS
mmHg
M
MX3 Plus
26032701 MX3Plus GB 01-12 14-04-2006 15:31 Pagina 5