Omron NJ Series Connection Guide

7．EtherCAT Connection Procedure
21
5
Right-click Node1 and select
Create Device Variable.
6
The variable names and
variable types are automatically
set.
Additional Information
The device variables are named automatically from a combination of the device names and
the port names.
The default device names are “E" followed by a serial number that starts from 001.
Additional Information
In this document, device variables are automatically named for a unit (a slave). Device
variables can also be manually named for I/O ports.

Omron NJ Series Specifications

General

Program Capacity	Up to 128 MB
SD Card Slot	Yes
Power Supply Voltage	24 VDC
Motion Control	Yes
USB Ports	1
Operating Temperature	0°C to 55°C
Communication Interfaces	Ethernet/IP, EtherCAT, USB
Safety Function	Optional
Storage Temperature	-20°C to 75°C
Communication Ports	USB
Dimensions	Varies by model
Weight	Varies by model