Omron NP3 Series - Page 57

4-4 Creating Screens
4
4
58 NP Introduction Manual
Creating Screens
6. Click the [Label Size] input field. Select [28] from the drop-down list.
The font size will be 28.
7. Move the handle on the frame to adjust frame size.
8. Click the [Label Color] input field.
You will see
.
9. Click . Select [(Black)RGB(16,16,16)].
The label color will be (Black)RGB(16,16,16).
This is the same color that is used for [Foreground Color], so the text becomes
unreadable.