Omron NP3 Series

Creating Screens
4
4
40 NP Introduction Manual
Creating Screens
4-1 Starting NP-Designer
This section tells how to start NP-Designer.
NP-Designer is a programming tool (software) to create the screens of the NP.
1. On the desktop, select [Start] - [All Programs] - [OMRON] - [NP-
Designer] - [NP-Designer].
NP-Designer will start.
When the NP-Designer startup is completed, you will see the Main Window.
Note For details on NP-Designer, such as its operating environment, installation, and
operation, refer to NP Series User's Manual (V096).