Omron NP3 Series - Page 66

4-4 Creating Screens
4
4
NP Introduction Manual 67
Creating Screens
6. Enter "0" for [Word], "0" for [Bit]. Push the [Enter] key.
The [Input] dialog box will close. [Read Address] will be [SERIALA:WR00000.00].
7. Repeat steps 1 to 6 to configure and .
See below for the details.
You configured these settings in this section.
The [01 Waiting] screen is now complete. Next, create the [02 Opening] screen.
Note You can export screens to bitmap images.
To export an image, select [Screen] - [Export Image] from the main menu.
Item (Function) Setting
Function Momentary
Write Address SERIALA:0.00
Read Address SERIALA:0.00
Item (Function) Setting
Function Momentary
Write Address SERIALA:0.01
Read Address SERIALA:0.01
Item (Function) Setting
Function Momentary
Write Address SERIALA:0.02
Read Address SERIALA:0.02