Omron NS12-TS01 V2 Series User Manual

1-1 NS-series PT Functions and Operation
● Displaying Screens
The information displayed on the screens is created using the CX-Designer on a computer
and transferred to the PT. The required screens can be displayed by using commands from
the host or touch switch operations.
Host
The required screens can
be displayed by using
commands from the host
or touch switch operations.
● Reading Data from the Host
A communications method such as NT Link Ethernet or Controller Link is used to connect the
host, and the required data is automatically read from the host.
Note: Some models do not support Ethernet or Controller Link.
NT Link or Ethernet,
Controller Link
Host
● Sending Data to the Host
Data input using touch switches (button ON/OFF status, numerals, and character strings) is
sent to the host.
Touch panel
Host
ON/OFF status,
numeric data, etc.
1-4

Omron NS12-TS01 V2 Series Specifications

General

Brand	Omron
Model	NS12-TS01 V2 Series
Category	Touch terminals
Language	English