Omron NX-EC0112

Related Manuals
28
NX-series Position Interface Units User’s Manual (W524)
NX-series CPU Unit
Hardware Use’s Manual
W535 NX701- Learning the basic
specifications of
the NX-series CPU
Units, including
introductory infor-
mation, designing,
installation, and
maintenance.
Mainly hardware
information is pro-
vided.
An introduction to the entire NX-series
system is provided along with the fol-
lowing information on the CPU Unit.
• Features and system configuration
• Introduction
• Part names and functions
• General specifications
• Installation and wiring
• Maintenance and inspection
Use this manual together with the
NJ/NX-series CPU Unit Software
User’s Manual (Cat. No. W501).
NJ-series CPU Unit
Hardware User´s Man-
ual
W500 NJ501-
NJ301-
NJ101-
Learning the basic
specifications of
the NJ-series CPU
Units, including
introductory infor-
mation, designing,
installation, and
maintenance.
Mainly hardware
information is pro-
vided.
An introduction to the entire NJ-series
system is provided along with the fol-
lowing information on the CPU Unit.
• Features and system configuration
• Overview
• Part names and functions
• General specifications
• Installation and wiring
• Maintenance and Inspection
Use this manual together with the
NJ/NX-series CPU Unit Software
User's Manual (Cat. No. W501).
NJ/NX-series CPU Unit
Software User's Manual
W501 NX701-
NJ501-
NJ301-
NJ101-
Learning how to
program and set
up an
NJ/NX-series CPU
Unit.
Mainly software
information is pro-
vided.
The following information is provided
on an NJ/NX-series CPU Unit.
• CPU Unit operation
• CPU Unit features
• Initial settings
• Programming based on IEC 61131-3
language specifications
Use this manual together with the
NJ-series CPU Unit Hardware User's
Manual (Cat. No. W500) and NX-series
CPU Unit Hardware User’s Manual
(Cat. No. W535).
NJ/NX-series CPU Unit
Built-in EtherCAT Port
User's Manual
W505 NX701-
NJ501-
NJ301-
NJ101-
Using the built-in
EtherCAT port on
an NJ/NX-series
CPU Unit.
Information on the built-in EtherCAT
port is provided.
This manual provides an introduction
and provides information on the config-
uration, features, and setup.
Use this manual together with the
NJ-series CPU Unit Hardware User's
Manual (Cat. No. W500) or NX-series
CPU Unit Hardware User’s Manual
(Cat. No. W535) and with the
NJ/NX-series CPU Unit Software
User's Manual (Cat. No. W501).
Manual name Cat. No. Model numbers Application Description