Omron NX-EC0112

29
Related Manuals
NX-series Position Interface Units User’s Manual (W524)
NJ/NX-series CPU Unit
Motion Control User’s
Manual
W507 NX701-
NJ501-
NJ301-
NJ101-
Learning about
motion control set-
tings and program-
ming concepts.
The settings and operation of the CPU
Unit and programming concepts for
motion control are described.
When programming, use this manual
together with the NJ-series CPU Unit
Hardware User's Manual (Cat. No.
W500) or NX-series CPU Unit Hard-
ware User’s Manual (Cat. No. W535)
and with the NJ/NX-series CPU Unit
Software User's Manual (Cat. No.
W501).
NJ/NX-series Instruc-
tions Reference Manual
W502 NX701-
NJ501-
NJ301-
NJ101-
Learning detailed
specifications on
the basic instruc-
tions of an
NJ/NX-series CPU
Unit.
The instructions in the instruction set
(IEC 61131-3 specifications) are
described. When programming, use
this manual together with the NJ-series
CPU Unit Hardware User's Manual
(Cat. No. W500) or NX-series CPU Unit
Hardware User’s Manual (Cat. No.
W535) and with the NJ/NX-series CPU
Unit Software User's Manual (Cat. No.
W501).
NJ/NX-series Motion
Control Instructions Ref-
erence Manual
W508 NX701-
NJ501-
NJ301-
NJ101-
Learning about the
specifications of
the motion control
instructions.
The motion control instructions are
described.
When programming, use this manual
together with the NJ-series CPU Unit
Hardware User's Manual (Cat. No.
W500) or NX-series CPU Unit Hard-
ware User’s Manual (Cat. No. W535)
and with the NJ/NX-series CPU Unit
Motion Control User’s Manual (Cat. No.
W507)
Manual name Cat. No. Model numbers Application Description