Omron NX Series Network Connection Guide

5 Target Devices and Device
8
Do not use output signals from an IO-Link System for safety applications.
Malfunction of the F3SG-SR/PG might result in serious injury.
Precautions for Correct Use
Update Sysmac Studio and CX-ConfiguratorFDT to the versions given in this section or later.
With versions later than the versions given in this section, there may be differences in
procedures and screens in descriptions from Section 8 onwards. If that happens, refer to the
Sysmac Studio Version 1 Operation Manual (Cat No. W504) and CX-ConfiguratorFDT Online
Help, and adopt the same actions.
Additional Information
Refer to the NX-series IO-Link Master Unit User’s Manual (Cat. No. W567) for information
on the unit power supply to the IO-Link Master Unit and specifications of power supplies that
can be used as the I/O power supply.
Additional Information
For details on the power supply and wiring specifications of the safety light curtain and
settings that use the Intelligent Tap, refer to the Safety Light Curtain/Multi-Beam Safety
Sensor F3SG-
 SR  /F3SG-  PG  User's Manual (Cat. No. Z405).
Additional Information
This section does not describe operation, installation and wiring of safety I/O functions such
as OSSD, and the functions and operations of devices. For details on safety I/O functions,
refer to either the manuals, instruction sheets and other documentation for the safety
controllers, or contact OMRON.

Omron NX Series Specifications

General

Brand	Omron
Model	NX Series
Category	Controller
Language	English