Omron NX Series Network Connection Guide

27
10 Programming Using IO-Link
10
Right-click the bottommost variable in the list of global variables, and click Create New .
11
Set the following variable name and data type.
Variable name: SLC_Power_Supply
Data type: WORD
12
Select Programming in the Multiview Explorer,
and open
Programming - POUs - Programs -
Program0 - Section0 .
13
Enter the following variable name that was created in Steps 9 to 11 to the output on the right of
the PackWord block.
Variable name: SLC_Power_Supply
14
Select Project - Build Controller .

Omron NX Series Specifications

General

Brand	Omron
Model	NX Series
Category	Controller
Language	English