Omron NX701-1620 - Page 184

7 Troubleshooting
7-34
NJ/NX-series Database Connection CPU Units User’s Manual (W527)
Event name
Invalid Extraction Condition
Event code
5401300Ehex
Meaning
The entered extraction condition is invalid.
Source PLC Function Module Source details Instruction Detection
timing
At instruction
execution
Error attributes
Level
Observation
Recovery
---
Log category
System
Effects User program Continues. Operation The relevant instruction will end according to
specifications.
System-defined
variables
Variable
Data type
Name
None
---
---
Cause and
correction
Assumed cause
Correction
Prevention
A text string that consists of a
NULL (16#00) character only
was specified in the Where input
variable.
Enter a text string that specifies
the extraction condition in the
Where input variable.
Enter a text string that specifies the
extraction condition in the Where
input variable.
Attached
information
Attached information 1: Error Location
Attached information 2: Error Location Detail, Rung Number. For a program section, the rung number from the
start of the section is given. For ST, the line number is given.
Attached information 3: Instruction Name and Instruction Instance Name Where Error Occurred. If there is
more than one instruction, all of them are given. If the instruction cannot be identified, nothing is given.
Attached information 4: Expansion Error Code (ErrorIDEx)
Precautions/
Remarks
None