BY35S / BY50S / BY80S / BY120S
6
37
3.
Hold the label stuck to the battery pack and remove it.
Insert the new battery pack.
4.
Reattach the metal cover and connect the connectors.
Caution
Pull on the white label attached to the
battery, and then hold the battery with your
hands to remove it.
Be careful not to drop the battery.
Insert the new battery pack.
You may hear a “pop” sound when you connect the battery if it is replaced after
the unit’s operation is stopped, but this is not abnormal.
Fit the metal cover into the grooves and
slide it downward to secure it.
(The battery is secured inside the case.)
Connect the red and black connectors.
(Make sure that the connectors are securely
connected.)
Specifi ed battery for replacement :
BYB80S for BY80S and BYB120S for BY120S
Do not remove the battery by holding the cables.
<BY80S>
<BY80S>
<BY120S>
<BY120S>
<BY80S>
<BY120S>
To Next Page
Loading...
