46
6. Using the UPS monitoring software and contact signal
6. Using the UPS monitoring software
and contact signal
* If you do not use the UPS monitoring software or contact signal, you can disregard this section.
Note 1: Compatible with Macintosh computers equipped with PowerPC CPU.
Note 2: The UPS stops automatically only when the battery is depleted. (Battery Mode continues until the battery is depleted.)
Note 3: Only the battery capacity can be monitored.
Note 4: This function can be used with Windows only. It cannot be used with Linux.
Required options (sold separately)
——
BUC26
—
Windows Server 2003 x64 Edition
●● ● —
Windows XP x64 Edition
●● ● —
Windows Server 2003
●● ● —
Windows XP/2000
Windows NT4.0
—— ● —
Windows Me/98
● —— —
Linux
● —— —
Mac OS X v10.4/Server v10.4
—— — ●
Mac OS X v10.3/Server v10.3 (*1)
Auto shutdown
●●▲
(*2)
●
UPS monitoring (operating status)
●● ● ●
UPS monitoring (data)
●▲
(*3)
— ●
Pop-up notification
●● ● ●
End when OS is inactive (*4)
●● ——
Auto file save (*4)
●● ——
Schedule operation
● —— ●
UPS setting change
● —— ●
External command execution
●● ● ●
Event log save
● —— ●
Data log save
● —— ●
Coordinated shutdown
● —— —
Output receptacle control
—— — —
Redundant power supply support
● —— —
Remote UPS management
● —— —
Mail send
● —— —
●
Standard
™
Option
▲
Limited
Compatible OS
Software function
Advanced functions,
network support
(Network management
applications)
Simple functions, standalone
UPS Power Manager (Mac)UPS service driver
PowerAct Pro
Standard OS UPS service
Function
Software title
6-1 Selecting the UPS monitoring software
The following UPS monitoring software is included with the BY50FW/BY75SW: PowerAct Pro (for Windows/
Linux), UPS service driver, and UPS Power Manager (for Mac). Choose which one to use based on the applica-
tion. Refer to the table below for details about compatibility.
UPS monitoring software function list
To Next Page
Loading...
Need help?
General
