63
Reference
References
A. Specifications
100V mode
86
+
4 to 114
+
4 VAC
110V mode
96
+
4 to 124
+
4 VAC
115V mode
101
+
4 to 129
+
4 VAC
120V mode
106
+
4 to 134
+
4 VAC
100V mode
100V
+
5%
110V mode
110V
+
5%
115V mode
115V
+
5%
120V mode
120V
+
5%
BY50FW BY75SW
Method
Operation method
Connectable devices
Input voltage
range
Frequency
Maximum current 7.5 A 11 A
100 / 110 / 115 120 VAC
100 to 120 VAC100 to 120 VAC
7.5 to 6.25 A5 to 4.2 A
500VA/300W 750VA/450W
approx. 6kg
approx. 9kg
287 x 330 x 45
90 x 322 x 298
20W 40W
3.5 minutes or more 5 minutes or more
12 hours
Nominal output voltage
Output capacity *1
Voltage
(effective value)*2
Switching time
Backup time*3
Type
Charging time
Operating ambient temperature
Expected lifespan
Operating ambient humidity
Full-time commercial power supply method
PC, display, and peripherals
Nominal input voltage
50/60Hz±4Hz
50/60Hz±1Hz
50/60Hz±1Hz
Nominal output current
Waveform
(In Commercial Power Mode/Batttery Mode)
Sine wave / Shine wave
8 msec. or less
Nominal output frequency
Compact sealed lead battery
0 to 40°C (during operation)/ -15 to 40°C (during storage)
battery fully charged and with no condensation
25 to 85%RH (during operation)/10 to 90%RH (during storage)
Input
Output
Battery
Environment
External dimensions
(W x D x Hmm)
Weight of UPS
Internal power
consumption (Normal, Max.)
(During backup operation)
4 to 5 years (at ambient temperature of 20°C)
--
--
--
--
100V mode
86
+
4 to 114
+
4 VAC
110V mode
96
+
4 to 124
+
4 VAC
115V mode
101
+
4 to 129
+
4 VAC
120V mode
106
+
4 to 134
+
4 VAC
--
--
--
--
-
-
-
-
100V mode
100V
+
5%
110V mode
110V
+
5%
115V mode
115V
+
5%
120V mode
120V
+
5%
(During backup operation)
-
-
-
-
Note 1: Make sure that both the VA value and the W value of the load capacity connected to the UPS
are within the range specified here.
Note 2: The power supply abnormality detection voltage can be changed in the UPS operating mode
settings.
Note 3: When rated load is connected, at 20°C, and for initial characteristics.