50
6. Using the UPS monitoring software and contact signal
“UPS Power Manager” UPS monitoring software for Mac
When using Macintosh computers such as Xserve, the included “UPS Power Manager” UPS monitoring
software enables you to automatically shut down the system when power failures or other input power
supply problems occur.
* Compatible with Macintosh computers equipped with PowerPC CPU only.
● When using UPS Power Manager “UPS monitoring software for Mac”
1. Connect the UPS to a computer.
Cable: Included USB communication cable
2. Install the included UPS monitoring software on the computer.
Software to install: UPS Power Manager
How to install: Refer to the separate “UPS monitoring software quick installation guide”.
S
E
R
.
BY50FW
USB port
Connector
Connect to
USB terminal
Connect to USB
port on PC
Included USB
communication cable
Connector
Connect to
USB port on UPS
BY75SW
USB port
Connector
Connect to
USB terminal
Connect to USB
port on PC
Included USB
communication cable
Connector
Connect to
USB port on UPS
(1) USB connection
To Next Page
Loading...
Need help?
General
