A - 99
Appendices
AC Servomotors/Servo Drives 1S-series with Built-in EtherCAT® Communications User’s Manual (I586)
A-3 Object List
A
*1. The data attribute is "R: Updated after the control power is reset or restarted" for the unit version 1.3 or earlier.
*2. The setting range is specified from 0 to 10,000 for the unit version 1.0.
*3. This object is available for the unit version 1.4 or later.
*4. The first value is for the Servo Drive with its capacity 3 kw or less. The second value is for the Servo Drive with its capacity
5 kW or more.
*5. This object is available for the unit version 1.2 or later.
*6. This object is available for the unit version 1.1 or later.
*7. If the unit version is 1.1 or earlier, the default setting is 0000 0000 hex.
*8. The default setting is 30 for the unit version 1.3 or earlier.
To Next Page
Loading...
Need help?
General
