Omron S8FS-G Series - Page 27

S8FS-G
27
Mounting Brackets (Order Separately)
Use the Front-mounting Brackets together with DIN Rail-mounting Power Supplies (S8FS-G@@@@@CD).
Note: Replacement brackets from the S8JX-N, S8JX-P, and S8VM series are available. Use these brackets for a front mounting configuration
using direct mounting models.
Refer to the data sheet (Cat. No.: T216-E1, T217-E1, and T218-E1) for more information.
Terminal cover (Order Separately)
Note: A Terminal Block Cover is provided with the Power Supply as a standard accessory. You can purchase another one if your Cover is damaged
or lost.
Power rating Mounting direction Model
15 W, 30 W, 50 W
100 W, 150 W and 300 W
Front-mounting S82Y-FSG-30F
600 W Front-mounting S82Y-FSG-60F
Power rating Applicable models Terminal Cover model number
15 W S8FS-G015@@@
S82Y-FSG-C5P30 W S8FS-G030@@@
50 W S8FS-G050@@@
100 W S8FS-G100@@@
S82Y-FSG-C7P150 W S8FS-G150@@@
300 W S8FS-G300@@@
600 W S8FS-G600@@@ S82Y-FSG-C7P-L (Input Output)
S82Y-FSG-30F
7.3 (ends)
(R1.5)
t=1.2
Two,
4.5
±0.1
dia
40
35
27
35
±0.1
57
1
25
(ends)
S82Y-FSG-60F
7.3 (ends)
Two,
4.5
±0.1
dia
(R1.5)
40
35
48
35
±0.1
57
1
25
(ends)
t=1.2