10
Disabling an option unit
26
Step2
Select the option slot "Value" column, and choose either "VALID" or "INVALID."
C101 through C104 in the chart correspond to option slots 1 through 4 of controller 1.
If controllers are linked to each other in a YC-Link/E network, the option slots of controller 2 and following
are shown in C201 through C204.
Option slots 1 through 4 Choose "VALID" or "INVALID"
Tip
If a cell's value is changed, its background color turns red.
Step3
Click the [Save] button to save the settings.
When saving is complete, the cell color changes from red to white.
The specified content is applied after the controller is restarted.
[Save] button
To Next Page
Loading...