Important information before reading this manual
1
Important information before reading this manual
Introduction
The OMRON network interface unit documentation consists of a User's Manual that is specific to each network
unit that describes the specifications and communication settings of that unit, and a Remote I/O Manual
describing the remote I/O specifications that are common to all network units.
OMRON network interface unit manuals
Content specific to each network unit
(network communication settings, etc.)
PROFINET user’s manual
(this document)
Remote I/O Manual
Content common to all networks
(remote I/O and remote command specifications etc.)
For details on network unit specifications and communication settings, refer to this User's Manual.
For details on communication functions between the controller and the host control device, such as remote I/O
and remote commands, refer to the Remote I/O Manual.
For details on the functions of the robot controller unit, refer to the following manuals.
YRCX Operator’s Manual ..................... for operation of the controller unit
YRCX User’s Manual ............................ for specifications and settings of the controller unit
YRCX Programming Manual ................. for the programming language used by OMRON robot controllers
To Next Page
Loading...
Need help?
General
