6.3 Replacement of Cooling Fan
59
7. Turn the SERVOPACK over, and then
connect the cooling-fan cable to the
fan connector on the SERVOPACK.
CAUTION: Make sure that the wiring
layout of the cable matches
that shown in the diagram.
8. Reattach the case and cover to the
SERVOPACK in their original positions.
Place the cooling-fan
cable as shown here.
TOEP_C710806_01A_0_0.book Seite 59 Montag, 2. Juli 2007 4:24 16
To Next Page
Loading...
