Omron SYSMAC CP2E-N D Series User Manual

18-21
18 Programming Device Operations
CP2E CPU Unit Software User’s Manual(W614)
18-4 Connecting Online to the CP2E and Transferring the Program
18
18-4-4 Starting Operation
Additional Information
For details on the transfer options, refer to the CX-Programmer Online Help.
To start operation, turn ON the power or change the operating mode to RUN mode.
Precautions for Correct UsePrecautions for Correct Use
To start operation when the power is turned ON, set the operation mode at startup in the PLC
Setup to MONITOR or RUN mode.
Use the following procedure to change the operating mode to RUN mode. To perform trial operation for
debugging or adjustments, change the operating mode to MONITOR mode.
Precautions for Safe Use
Always confirm the safety of the controlled system before changing to MONITOR or RUN mode.
4 Click the Yes Button.
5 Click the OK Button.
This completes transferring the lad-
der program.
18-4-4 Starting Operation

Omron SYSMAC CP2E-N D Series Specifications

General

Brand	Omron
Model	SYSMAC CP2E-N D Series
Category	Computer Hardware
Language	English