31
RFID System
User's Manual
Section 2 Installing the USB Driver (V600-CHUD)
Section 2
Communications Preparations
Checking Installation
Check that the driver is correctly installed.
1. Connect the Hand-held Reader Writer to the personal computer.
2. On the Start Menu, select Control Panel - Performance and Maintenance.
3. Click the System Icon.
4. Click the Device Manager Button.
5. Select Ports (COM & LPT), and check that OMRON RFID USB COM is displayed.
The driver is correctly installed if this port is displayed.
Communications with the Hand-held Reader Writer can be performed with the COM number displayed in parentheses after
OMRON RFID USB COM.
To Next Page
Loading...
