11
RFID System
User’s Manual
Section 1 Names and Functions of Components
Section 1
Product Overview
Names and Functions of Components
V600-CHUD
•Operation Indicator (LED)
After the operation indicator is lit or flashing for a certain time, it will turn OFF.
•Activate Switch
When button commands (button commands, button auto commands) are
used and the activate switch is pressed, communications with the Data
Carrier will commence. (For details on button commands, refer to Section
3 Commands.)
•Interface Connector
This is a USB interface with an A-series plug based on USB 1.1.
•Antenna
To communicate with the Data Carrier, move the antenna head closer to
it.
Display Meaning
Lit green
A command has been received from the host device.
Communications with the Data Carrier have completed normally.
The execution result of the noise detection command (NS) is “A” (low
noise).
The result of the error noise detection command (EN) is “0” (normal).
Flashing green
When the power is turned ON, after initialization of the Hand-held
Reader Writer is completed
Communications with the Data Carrier are in progress.
Lit red
A communications error with the Data Carrier has occurred.
A CPU error has occurred.
Flashing red
A Data Carrier non-existent error has occurred.
A communications error with the host device has occurred.
The execution result of the noise detection command (NS) is “B” (high
noise).
The result of the error noise detection command (EN) is “1” (error).
Antenna
Operation indicator (LED)
Activate switch
Interface connector
To Next Page
Loading...
