WL-N/WLG
75
General-purpose Switches
Environment-resistant Switches
Spatter-prevention Switches
Long-life Switches Accessories Safety Precautions
Ordering Information
Single-item ordering models
General-purpose Models
* The WL-2H1100-K, WL-2H2100-K, and WL-2H4100-K correspond with each set model WLG@, the design of which was changed in April 2019.
Please inquire if you desire a single-item head manufactured before the design change. On products that underwent the design change in April
2019, the front of the switch box cover at the bottom front has a protruding shape, and on earlier products has a depressed shape.
Common Accessories (Sold Separately)
Actuator Pretravel (PT) Set Model Numbers
Switches without levers Heads (with Actuators) Actuator *
Model Model Model
Roller lever: R38 mm
15±5° WLCA2-N WLRCA2-N WL-1H1100-N
WL-1A100
25±5° WLCA2-2-N WLRCA2-2-N WL-3H1100-N
20° max. WLCA2-2N-N WLRCA2-2N-N WL-1H1100-N
10° WLG2 --- WL-2H1100-K *
Adjustable roller lever
(R25 to 89 mm)
15±5° WLCA12-N WLRCA2-N WL-1H2100-N
WL-2A100
25±5° WLCA12-2-N WLRCA2-2-N WL-3H2100-N
20° max. WLCA12-2N-N WLRCA2-2N-N WL-1H2100-N
10° WLG12 WLRG2 WL-2H2100-K *
Adjustable rod lever:
(25 to 140mm)
15±5° WLCL-N WLRCL-N WL-4H4100-N
WL-4A100
25±5° WLCL-2-N WLRCA2-2-N WL-3H4100-N
20° max. WLCL-2N-N WLRCA2-2N-N WL-1H4100-N
10° WLGL WLRG2 WL-2H4100-K *
Sealed top plunger 1.7 mm max. WLD18-N --- WL-7H100-N ---
Sealed top-roller plunger 1.7 mm max. WLD28-N --- WL-7H400-N ---
Sealed top-ball plunger 1.7 mm max. WLD38-N --- WL-7H300-N ---
Horizontal plunger 2.8 mm max. WLSD-N --- WL-8H100-N ---
Horizontal-roller plunger 2.8 mm max. WLSD2-N --- WL-8H200-N ---
Horizontal-ball plunger 2.8 mm max. WLSD3-N --- WL-8H300-N ---
Coil spring (6.5 dia.) 20±10 mm WLNJ-N --- WL-9H100-N ---
Coil spring (4.8 dia.) 20±10 mm WLNJ-30-N --- WL-9H200-N ---
Flexible rod: Resin rod
(8 dia.)
40±20 mm WLNJ-2-N --- WL-9H300-N ---
Flexible rod: Steel wire
(1 dia.)
40±20 mm WLNJ-S2-N --- WL-9H400-N ---
Fork Lock Lever A 55° max. WLCA32-41-N
WLRCA32-N
WL-5H5100-N WL-5A100
Fork Lock Lever B 55° max. WLCA32-42-N WL-5H5102-N WL-5A102
Fork Lock Lever C 55° max. WLCA32-43-N WL-5H5104-N WL-5A104
Fork Lock Lever D 55° max. WLCA32-44-N WL-5H5104-N WL-5A104
. . . . . . . . . . . . Switches without levers, heads, and actuators can be ordered separately. Use by combining with models that are
not available as a set. You can also use them as maintenance parts for inventory management.
Bottom-most part of housing has
a depressed shape
The housing of the bottom-most part protrudes
The line of the bottom-most face of
the cover is 4 mm below the cover
attachment screw and is long
Bottom-most
side of cover
Before design change After design change
The bottom-most face of the case protrudes 4 mm
from the contact surface of the cover
To Next Page
Loading...
