Omron ZFX-C

About Communication Commands
16
ZFX-C Serial Communication Command Reference
Starting Continuous Measurement
< Command format >
< Response format >
Ending Continuous Measurement
< Command format >
< Response format >
Performing re-measurement using saved images
< Command format >
< Response format >
< Explanation of parameters >
Measurement value The re-measurement value for the saved image of specified save memory No. is returned.
When the save memory No. is omitted, the re-measurement value for the latest saved
image is returned.
Configuration of Measurement Value Data p.8
MEA S
C
R
M/C
C
R
URE / C
or
O K
C
R
E R
C
R
C
R
When processing ends successfully
When processing fails
Measurement value
(for number of continuous measurements)
MEA S
C
R
M/E
C
R
URE / E
or
OK
C
R
ER
C
R
When processing ends successfully
When processing fails
M EAS
C
R
M /
C
R
URE/I I
or
Save memory No.
(max. 2 digits)
Save memory No.
(max. 2 digits)
O K
C
R
E R
C
R
C
R
When processing ends successfully
When processing fails
• Measurement images are not stored in the specified save memory No.
• [Image storage] option is set to OFF
Measurement value