Omron ZFX-C Command Reference

About Communication Commands
22
ZFX-C Serial Communication Command Reference
< Response format >
< Explanation of parameters >
Position correction item
No.
Specifies the position correction item No. (0 to 3)
Item Nos are assigned as follows:
0: Position correction0 of Camera0
1: Position correction1 of Camera0
2: Position correction0 of Camera1
3: Position correction1 of Camera1
Data No. Specifies the data No. (0 to 127)
For details, see
"Parameter List (p.39)."
Acquired value The detailed conditions and thresholds of position correction is returned.
For details, see
"Parameter List (p.39)."
C
R
Acquired value
O K
C
R
E R
C
R
When processing ends successfully
When processing fails

Omron ZFX-C Specifications

General

Brand	Omron
Model	ZFX-C
Category	Accessories
Language	English