Omron ZFX-C - Page 57

About Communication Commands
ZFX-C Serial Communication Command Reference
55
Position shift correction parameters
2 model search
Data No. Parameter Output Range
51 Search mode 0: Hi-speed, 1: Normal, 2: Precision
53 Rotation range 0 to 180
54 Skipping angle 0: 1°, 1: 2°, 2: 3°, 3: 5°, 4: 10°, 5: 15°, 6: 20°,
7: 30°
55 Interpolation 0: OFF, 1: ON
56 Verification 0: OFF, 1: ON
57 Candidate level 0 to 100
71 Correlation upper limit value 0 to 100
72 Correlation lower limit value 0 to 100
73 X upper limit value -9999.999 to 9999.999
74 X lower limit value -9999.999 to 9999.999
75 Y upper limit value -9999.999 to 9999.999
76 Y lower limit value -9999.999 to 9999.999
77 Angle upper limit value -180 to 180
78 Angle lower limit value -180 to 180