72
GB
2 Safety Instructions
1505093, Edition 2012-05, Version 5
2.5.4 Maintenance work
Electric shock hazard
Power supply cables are laid in the pendant system and the adaptions 7
- 9. Contact with energised components presents a danger to life from
electric shock. Disconnect the pendant system from the mains before any
maintenance work:
• Disconnect all the poles of the pendant system from the mains and
prevent it from being switched back on again.
• Check whether the end device (e.g. flat screen, OR lamp, etc.) is de-
energised.
• Wait until the end device (e.g. flat screen, OR lamp, etc.) has cooled
down.
Maintenance work
• The pendant system and the adaption 7 - 9 must be checked as
described in
“Chapter 13, Inspection Plan, on page 108”
.
• In case of failure or damage, please contact your supplier.
Warranty
Ondal Medical Systems GmbH warrants the functional reliability of the
pendant system only under the condition that:
• No structural alterations are made to the pendant system. Unauthor-
ised modifications or conversions of the pendant system are not per-
mitted for safety reasons.
• Only genuine spare parts or accessories and those defined and
approved by Ondal Medical Systems are used. The use of other parts
may involve unknown risks and must be avoided in all cases.
• Inspections and maintenance work must be carried out at the specified
time intervals.
1WARNING
1CAUTION
To Next Page
Loading...
