ONE100 Chapter 3
Installation Guide Device Description
26
3.4.1 Introducing the Front Panel LEDs
When all the connections are made and the ONE100 is powered, the LEDs on the front panel reflect the
actual status of the device.
The following figure shows the front panel LED indicators of the ONE100 with plastic housing:
The following figure shows the front panel LED indicators of the ONE100 with metal housing:
LED states
One front panel LED can reflect different status modes by the way it lights up. The front panel LEDs can
light up as follows:
LED state LED duty cycle Description
OFF 0 % The LED never lights up.
ON 100 % The LED lights up continuously.
blinking 50 % The LED is as much lit as it is out.
To Next Page
Loading...
