EasyManua.ls Logo

OneAccess ONE100 - Safety Information; Consignes de Sécurité

OneAccess ONE100
74 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ONE100 Chapter 1
Installation Guide Safety Instructions
6
1.1 Safety Information / Consignes de Sécurité
Information to user Informations pour l'utilisateur
Any changes or modifications not expressly
approved by OneAccess could void the user's
authority to operate the equipment.
The external power supply may be delivered
together with the ONE100.
Tout changement ou modification non
expressément approuvé par OneAccess pour-
rait invalider l'autorisation accordée à l'utilisa-
teur de mettre l'équipement en service.
L' adaptateur ou le câble d'alimentation élec-
trique prescrit par OneAccess peut ou non être
livré d'origine avec le ONE100.
IEEE 802.11b/g/n operation of this product in
Canada is firmware-limited to channels 1
through 11.
This Class A digital apparatus complies with
Canadian ICES-003.
L'utilisation du mode IEEE 802.11b/g/n (WiFi)
de ce produit au Canada est limitée par pro-
gramme aux canaux 1 à 11.
Cet appareil numérique de la classe A est con-
forme à la norme NMB-003 du Canada.
Electro-Magnetic Field Exposure Statement
The radio interface installed in the ONE100 has been tested and found to comply with the in force
applicable EN50385 requirements and limits. These last have been designed to provide reasona-
ble protection against Electro-Magnetic Field exposure of the user’s body when the equipment is
operated in a commercial environment.
At least 20 cm (8 inches) of separation distance between the ONE100 device and the user's body
must be maintained at all times.
FCC Radiation Exposure Statement
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reason-
able protection against harmful interference when the equipment is operated in a commer-
cial environment. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environ-
ment.
IEEE 802.11b/g/n operation of this product in the USA is firmware-limited to channels 1 through 11.
Any changes or modifications not expressly approved by OneAccess could void the user's author-
ity to operate the equipment.

Other manuals for OneAccess ONE100

Related product manuals