ONE100 Chapter 4
Installation Guide Interface Description
45
12VDC-2,2A This is the power input. Insert the plug of the external power supply in this socket.
Secure the power supply connection by installing the DC power supply cord into
the pholding clip provided on the back panel.
Refer to 5.1 - Power Requirements on page 57 for the power specifications of the
ONE100.
This is the earth stud. Connect the earth wire to this stud. Refer to 1.5 - Back Panel
Earth Connection on page 14 for more information.
Contact the appropriate electrical inspection authority or an electrician if you are
uncertain that suitable grounding is available.
Interface identi-
fication
Interface function
To Next Page
Loading...
