Onkyo A-7022

7. LINE VOLTAGE AND FUSE
The model A—7022 operates on one of the four line voltages, 110V, 120V, 220V, and 240V.
Set the unit to the proper line voltage by following the procedure described below.
CHANGING LINE VOLTAGE SETTING AND FUSE
Turn the voltage selector so that the proper line voltage marking can be seen through the slot on the rear panel. 4 x
Whenever the position of the selector is changed, check the rating of the fuse. 4) op ~
A 2A fuse is to be used for either 220V or 240V operation and a 4A fuse for 110V or 120V operation. 25h (6 YC
Ge
WH GE é (dow
—_
oeanas (uP)
“ i
* N
cr ~P