54
Playing the HDD
Basic Operations of Playback
1
CD/HDD receiver
Start playback.
Press the Play/Pause [1/3] button or Play [1]
button.
The track you played or recorded the last time is played.
Tip:
When you press the remote controller’s HDD [1] button,
the CD/HDD receiver automatically selects an appropriate
input source and starts playback of a track.
1
Switch the input
source to HDD
(see page 24).
or
Remote
controller
Album name
01:12
Track01
Album name
Format
Track name
Elapsed time of
current track
To pause playback:
Press the remote controller's Pause [3] button or the CD/HDD receiver’s Play/
Pause [1/3] button. To resume playback, press the Play/Pause [1/3] button
again.
To stop playback:
Press the Stop [2] button on the CD/HDD receiver or remote controller.
To select tracks:
Press the [RETURN] button to return to the track list, then press the Up and Down
[q]/[w] buttons to select a track.
To select the previous or next track:
Press the Previous/Next [7]/[6] buttons or turn the MULTI JOG dial on the
CD/HDD receiver to select the previous or next track.
To fast forward or fast reverse:
Press the Fast Reverse/Fast Forward [
5]/[4] buttons during playback or
pause. Where you want to start playback, release the button.
To Next Page
Loading...
