Do you have a question about the Onkyo HTR-280(B) and is the answer not in the manual?
Channels | 5.1 |
---|---|
Total Harmonic Distortion | 0.08% |
Frequency Response | 10 Hz - 100 kHz |
Audio Formats Supported | Dolby Digital, DTS |
Speaker Load Impedance | 6 - 16 ohms |
FM Tuner | Yes |
AM Tuner | Yes |
Tuning Range | FM 87.5 - 108 MHz, AM 522 - 1611 kHz |
Video Connections | Composite Video |
Input Sensitivity and Impedance | 200 mV/47 kΩ |
Digital Audio Inputs | 1 x Optical, 1 x Coaxial |
Power Output | 100W per channel into 6 Ohms |
Signal-to-Noise Ratio | 100 dB (Line) |
Flowchart for diagnosing and resolving no power problems.
Flowchart for diagnosing and resolving no display problems.
Flowchart for diagnosing and resolving no sound problems.
Flowchart for diagnosing and resolving no picture problems.
High-level overview of HDMI and audio signal paths.
Diagram showing internal wiring connections between components.
Detailed electrical circuit schematics for various sections.
Layouts of major circuit boards for component identification.
Instructions for verifying current firmware versions on the unit.
Steps required to prepare for firmware update.
Step-by-step instructions for performing firmware updates.
Illustrated list of parts for physical assembly and replacement.