En-26
Listening to the Radio—Continued
Press the [TUNER] button on the remote con-
troller, or the [INPUT] button on the top panel,
repeatedly to select “DAB”.
When tuned into a DAB station, the Tuned ( )
indicator appears and the DAB indicator as well.
Selecting DAB for the Very First Time
The very first time you select DAB, the Auto Tuning
function automatically scans the DAB Band III for the
multiplexes (i.e., stations) available in your area.
Once the scanning process is complete, the first station
that was detected is selected.
Using the Scan Function Manually
If a new DAB station is introduced, or you move to a new
area, you can run the Auto Tuning function manually.
Note:
• When you rescan for DAB stations, the previously-
memorized stations will be cleared.
1 Press the [MENU] button.
2 Use the Up/Down []/[] buttons to select “Scan?”
and then press the [ENTER] button.
3 Use the Up/Down []/[] buttons to select World,
and then press the [ENTER] button to start the Auto
Tuning function.
If no station is detected after scanning, “No Station”
appears on the display.
Selecting DAB Stations
Use the TUNING []/[] buttons to select the
DAB stations.
Displaying DAB Radio Information
Press the remote controller’s [DISPLAY] button
repeatedly to display more information about the
selected DAB station.
1. DLS (Dynamic Label Segment)
When tuned to a station that’s broadcasting DLS
text data, the text will scroll across the display.
2. Program Type
Displays the type of program.
Listening to DAB Digital Radio
To Next Page
Loading...
Need help?
General
