En-29
Listening to the Radio—Continued
You must store some presets before you can select them
(see page 28).
1
Press the [TUNER] button, or the [INPUT]
button on the top panel, repeatedly to select
“FM” or “DAB”.
The preset you selected the last time you listened to
the radio will be selected.
2
Use the PRESET []/[] buttons to select a
preset.
Press the PRESET [] button to select the
previous preset. Press the PRESET [] button to
select the next preset.
Tip:
• If you press the remote controller’s [TUNER] button
while the CD receiver is on Standby, it will turn on
automatically and the station that you listened to last
time will be heard.
Press the [DISPLAY] button repeatedly to
display the following RDS information.
RDS can be viewed on this unit only in areas where RDS
broadcasts are available.
What is RDS?
RDS stands for Radio Data System and is a method of
transmitting data in FM radio signals. It was developed
within the European Broadcasting Union (EBU) and
many European FM radio stations use it these days.
The unit supports and displays Program Service Name
(PS) and Radio Text (RT) RDS data.
The RDS indicator appears on the display when the unit
is tuned to an FM station that supports RDS.
Notes:
• If the signal from an RDS station is weak, RDS data
may be displayed intermittently or not at all.
• The message “Waiting” may appear while the RT data
is being received.
1
Select the preset you want to erase.
2
Press and hold down the [CLEAR] button to
erase the preset.
When the preset has been erased, presets following
the erased preset will be renumbered forward and
redisplayed.
To Next Page
Loading...
Need help?
General
