Onkyo CR-N7 User Manual

50
Using the Timer Functions—Continued
4
Press MULTI JOG.
(Only for Timer Rec)
Check connections and settings to the cassette tape decks.
5
Turn MULTI JOG to select “Once” or “Every.”
The Once timer operates only one time. The Every timer operates every week.
After selecting one, press MULTI JOG.
If you selected “Once,” the timer operates only one time on the specified day.
Turn MULTI JOG to select the day(s) of the week.
When the desired day of the week is displayed, press MULTI JOG.
If you selected “Every,” the timer operates on the specified day(s) of every week.
Turn MULTI JOG to select the day(s) of the week.
When the desired day of the week is displayed, press MULTI JOG.
Days Set (You can specify the range of days.)
If you selected “Days Set,” you can select any consecutive days of the week.
1. Turn MULTI JOG to select the first day.
When the desired day of the week is displayed, press MULTI JOG.
2. Turn MULTI JOG to select the last day.
When the desired day of the week is displayed, press MULTI JOG.
In this example, the timer operation is activated at the specified time, every Tuesday
through Sunday.
CD receiver
Remote
controller
CD receiver
Remote
controller
SUN
TUE
MON
Days Set Everyday
WED THU
SAT
FRI

Onkyo CR-N7 Specifications

Power

power supply	AC 230–240 V, 50 Hz
power consumption	68 W
stand-by power consumption	0.3 W

Audio Inputs and Outputs

analog inputs	LINE, TAPE, HDD
digital outputs	Optical: 1
analog outputs	TAPE, HDD

Amplifier Specifications

power output	14 W + 14 W (8 Ω, 40 Hz–20 kHz THD, 0.4%)
dynamic power	26 W + 26 W (4 Ω, JEITA)
damping factor	25 (8 Ω)

Tuner Specifications

fm tuning frequency range	87.5 MHz–108 MHz
am tuning frequency range	522 kHz–1611 kHz
stereo separation	40 dB (1 kHz)

CD Specifications

frequency response	10 Hz–20 kHz
audio dynamic range	92 dB
thd (total harmonic distortion)	0.009 %

Weight and Dimensions

dimensions	205 W x 147 H x 356 D mm
weight	4.3 kg