> Before Start > Part Names > Install > Playback
Advanced Setup | Others
24
Time setting / Using the alarm to start play
Time setting
By setting the time, you can use the alarm to start play.
1. Press on the remote controller to display the
menu.
2. Press 3/4 (a) to select "Clock Setting", then press
ENTER (d).
3. When setting for the first time, press ENTER (d)
while "CLOCK" is flashing. From the next time, press
ENTER (d) while the day of the week and time are
displayed.
4. Set the day of the week with 2/1 (c), then press
ENTER (d).
5. Set the time with 2/1 (c), then press ENTER (d).
6. Set the minutes with 2/1 (c), then press ENTER
(d). Setting ends automatically after a short time.
0 Once you have completed the setting, the set time
can be displayed by pressing NOW PLAYING
button (b) twice.
1
2
d
a
c
b
To Next Page
Loading...
Need help?
General
Weight and Dimensions
