> Before Start > Part Names > Install > Playback
Advanced Setup | Others
26
Adjusting sound quality
Adjusting the bass (BASS)
1. Press TONE button (c).
2. Press 2/1 buttons (a) to adjust the bass. (s6 to
i6)
Adjusting the treble (TREBLE)
1. Press TONE button (c) twice.
2. Press 2/1 buttons (a) to adjust the treble. (s6 to
i6)
Emphasizing the low range (S.BASS)
1. Press TONE button (c) three times.
2. Press 2/1 buttons (a) to select "ON" and press
ENTER (b).
Reproduce the original sound faithfully
(DIRECT mode)
Processing that affects sound quality is shut down so
sound closer to the original is reproduced.
1. Each time you press DIRECT (d), the settings
switches between "ON" and "OFF".
0 When the DIRECT mode is on, BASS, TREBLE, and
S.BASS are disabled.
a
d
c
b
To Next Page
Loading...
