To Next PageTo Next Page
Need help?Do you have a question about the Onkyo HT-R290 and is the answer not in the manual?
General| Type | AV Receiver |
|---|---|
| Channels | 5.1 |
| HDMI Inputs | 4 |
| HDMI Outputs | 1 |
| Optical Inputs | 1 |
| Coaxial Inputs | 1 |
| Analog Audio Inputs | 5 |
| Subwoofer Pre-Out | Yes |
| Dolby Digital | Yes |
| DTS | Yes |
| HDMI Version | 1.4a |
| Bluetooth | No |
| Wi-Fi | No |
| Total Harmonic Distortion (THD) | 0.08% |
| Supported Audio Formats | Dolby Digital, DTS |
| Video Upscaling | Yes (up to 1080p) |
Instructions for installing batteries in the remote controller.
How to point the remote control sensor for proper operation.
Details on amplifier specs, audio processing, and connectivity options.
Overview of additional features like presets and Audyssey.
Identifies buttons and indicators on the AV receiver's front panel.
Explanation of the information shown on the AV receiver's front display.
Details the various input and output jacks on the rear panel.
How to use the remote to operate the AV receiver and tune radio stations.
Guide on how to connect speaker wires to the AV receiver terminals.
Tips for optimal subwoofer placement for best bass performance.
Setting up speakers and important connection warnings.
Explanation of various video and audio connection types.
How to assign HDMI inputs and use the Audio Return Channel.
Default input assignments and how to connect for recording.
How RI enables system control and remote operation of components.
Instructions for connecting antennas and the power cord.
Steps to power on and off the AV receiver using the front panel or remote.
How to play sources and listen to AM/FM radio.
How to manually tune stations, set presets, and use RDS features.
How to choose different sound modes for movies, music, and games.
Descriptions of various DSP modes like Orchestra, Unplugged, Studio-Mix.
Using the Home menu for quick settings and configuring speaker A/B.
Adjusting display brightness and viewing source information.
Improving sound quality for compressed music files.
Silencing audio, using headphones, and recording audio/video.
Overview of the on-screen setup interface and navigation steps.
How to assign input selectors for various digital and analog sources.
Setting up speaker sizes, subwoofer, and crossover frequencies.
Setting speaker distances and adjusting output levels for balanced sound.
Configuring multiplex, mono, Dolby, and DTS sound settings.
Adjusting sound quality based on volume and dynamic range.
Correcting audio sync, naming inputs, and setting audio priorities.
Configuring display options, remote IDs, tuner steps, and power management.
Managing HDMI control, signal pass-through, and audio output to TV.
Enabling ARC for audio return and LipSync for audio delay correction.
Adjusting tone, speaker volumes, and enhancing bass presence.
Using Audyssey features and the Late Night listening mode.
Improving compressed music quality and softening movie soundtracks.
Connecting and operating iPod/iPhone, including auto power and direct change.
Using the RI Dock for media playback and controlling iPod/iPhone.
Entering codes to control external Onkyo devices via remote.
Restoring default settings for remote control buttons and the controller itself.
Solutions for power issues and no sound/quiet audio problems.
Diagnosing issues with speakers, signal formats, and video display.
Resolving noisy radio reception and remote control malfunctions.
Visualizing how video and audio signals travel through the receiver.
Overview of HDMI capabilities, including audio formats and copyright protection.
Lists compatible devices and describes linked control operations.
Steps for connecting and configuring HDMI components for linked operation.
Technical details on amplifier, power, dimensions, and inputs/outputs.
