To Next PageTo Next Page
Need help?Do you have a question about the Onkyo HT-R330 and is the answer not in the manual?
General| Channels | 5.1 |
|---|---|
| HDMI Output | 1 |
| Component Video Inputs | 2 |
| Digital Audio Inputs (Optical) | 1 |
| Digital Audio Inputs (Coaxial) | 1 |
| Speaker Impedance | 6 Ohms |
| Video Inputs | 4 (Composite) |
| Video Outputs | 1 (Composite) |
| Audio Inputs | 5 (Analog) |
| Audio Outputs | 1 (Analog) |
| Tuner Type | AM/FM |
| Remote Control | Yes |
| Total Harmonic Distortion | 0.08% (1 kHz, 1 W) |
| Frequency Response | 20 Hz - 50 kHz |
| Audio Formats Supported | Dolby Digital, DTS |
| Dimensions (W x H x D) | 435 x 150 x 318 mm |
| Input Sensitivity/Impedance | 200 mV/47 kΩ |
| Signal-to-Noise Ratio | 100 dB |
| Preset Stations | 40 |
Details amplifier output, power, and frequency response parameters.
Covers FM/AM tuning frequency range, sensitivity, and S/N ratio.
Provides power supply, consumption, dimensions, and weight details.
Instructions for replacing fuses, including safety symbols and ratings.
Procedure for safety checks, focusing on insulation resistance.
Steps to reset memory and modes to factory default settings.
Procedure to check speaker protection circuit for DC voltage issues.
Procedure to check speaker protection for current detection.
Checks output sensor and thermal sensor functions for power supply control.
Schematic details of the audio input stage and related components.
Schematic diagrams for the driver amplifier stage.
Detailed schematics of the power supply unit and its components.
Procedure for adjusting idling current for optimal performance and stability.
