Onkyo HT-R340

14
Remote Controller-Continued
To select your DVD player as the input source, press:
To
set the remote controller to DVD mode, press the
[DVD]
REMOTE MODE button.
ONKYO
RC-646S
CD ON/STANDBY button
This button sets the DVD player to On or Standby.
® Number buttons
These buttons are used to enter title, chapter, and
track numbers and to enter times for locating spe-
cific points in time.
@ DISC +/- button
This button selects discs on a DVD changer.
@ TOP MENU button
This button is used to select a DVD's top menu.
(§) Arrow [.]I[T]I[~]I[~] & ENTER buttons
These buttons are used to navigate DVD menus and
the DVD player's onscreen setup menus.
® RETURN button
This button is used to exit the DVD player's
onscreen setup menu and to restart menu playback.
(j) Playback buttons
From left to right: Pause, Play, Stop, Fast Reverse,
Fast Forward, Previous, and Next.
® SUBTITLE button
This button is used to select subtitles.
® AUDIO button
This button selects foreign language soundtracks
and audio formats (e.g., Dolby Digital or DTS).
@) DISPLAY button
This button is used to display information about the
current disc, title, chapter, or track on the DVD
player's display, including the elapsed time, remain-
ing time, total time, and so on.
@ CLR button
This button is used to cancel functions and to clear
entered numbers.
@ MENU button
This button is used to display a DVD's menu.
@ SETUP button
This button is used to access the DVD player's
onscreen setup menus.
@ RANDOM button
This button is used with the random playback func-
tion.
@ REPEAT button
This button is used to set the repeat playback func-
tions.
@ PLAY MODE button
This button is used to select play modes on a com-
ponent with selectable play modes. .