Onkyo HT-R340 User Manual

Remote Controller-Continued
To select your CD player as the input source, press:
To
set the remote controller to CD mode, press the
[CD] REMOTE MODE button.
ONKYO
RC-646S
CD ON/STANDBY button
This button sets the CD player to On or Standby.
® Number buttons
These buttons are used to enter track numbers and
to enter times for locating specific points in time.
@ DISC +/- button
This button selects discs on a CD changer.
@ Playback buttons
From left to right: Pause, Play, Stop, Fast Reverse,
Fast Forward, Previous and Next.
® DISPLAY button
This button is used to display information about the
current disc or track on the
CD player's display,
including the elapsed time, remaining time, total
time, and so on.
® CLR button
This button is used to cancel functions and to clear
entered numbers.
(J) RANDOM button
This button is used with the random playback func-
tion.
® REPEAT button
This button is used to set the repeat playback func-
tions.
* The VOL [.J/[TJ and LISTENING MODE but-
tons work the same as for RECEIVER mode.
15

Onkyo HT-R340 Specifications

General

Channels	5.1
Audio Decoding	Dolby Digital, DTS
AM/FM Tuner	Yes
Speaker Impedance	6 Ohms
HDMI	Yes
HDMI Outputs	1
Analog Audio Inputs	4
Subwoofer Output	Yes
Bluetooth	No
Wi-Fi	No
Power Output	100W per channel
Inputs	HDMI, Composite Video, Digital Audio (Optical/Coaxial), Analog Audio
Outputs	HDMI, Composite Video, Analog Audio, Subwoofer Pre-out
Type	AV Receiver
Input Sensitivity	200 mV
Signal-to-Noise Ratio	100 dB
Dimensions	435 x 150 x 318 mm